Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster
Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| 1 | Screw, Instrument Panel Cluster Bezel (Qty: 1) Tip: The screw can be accessed by opening the instrument panel compartment. Tighten: 2 N.m (18 lb in) |
| 2 | Trim Plate, Instrument Panel Cluster Tip: Pull the trim plate away from the instrument panel far enough to disconnect the headlamp switch electrical connector, then remove from the vehicle. |
| 3 | Nut, Cluster Trim Panel (Qty: 1) |
| 4 | Clip, Instrument Panel Cluster Trim Plate (Qty: 4) |