Sunshade Replacement

Fig 1: Sunshade

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure Lower the front of the headliner to access the sunshade electrical connector, if necessary. Refer to Headliner Replacement .
1	Trim Cover, Sunshade
2	Screw, Sunshade (Qty: 3) Tighten: 3 N.m (27 lb in)
3	Sunshade Assembly Tip: Disconnect the electrical connector. Remove the sunshade anchor from the roof by unsnapping, if needed.