Shift Interlock Solenoid: Service and Repair

Automatic Transmission Shift Lock Actuator Replacement

Removal Procedure





1. Disconnect the negative battery cable.
2. Remove the center console.
3. Disconnect the automatic transaxle shift lock actuator electrical connector (1).
4. Remove both ends of the automatic transaxle shift lock actuator from the pivot points.

Installation Procedure





1. Install both ends of the automatic transaxle shift lock actuator to the pivot points.
2. Connect the automatic transaxle shift lock actuator electrical connector (1).
3. Install the center console.
4. Connect the negative battery cable.