Center Rear

SEAT BELT REPLACEMENT - CENTER REAR

REMOVAL PROCEDURE




1. Remove the rear seat cushion.
2. Remove the center seat belts nuts (1).
3. Remove the center seat belts from the vehicle.

INSTALLATION PROCEDURE




1. Install the center seat belts to the vehicle.

IMPORTANT: Verify that the rear seat belt anchors are installed in their proper orientation.

2. Install the center seat belts nuts (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts to 42 N.m (31 lb ft).

3. Install the rear seat cushion.

IMPORTANT: Be sure to route the buckle correctly through the rear seat cushion.