Low Tire Pressure Indicator Inoperative

Step	Action	Yes	No
1	Did you perform the TPM Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Tire Pressure Monitoring
2	Turn OFF the ignition. Turn ON the ignition, with the engine OFF. Observe the tire pressure indicator on the systems monitor, or the Instrument Panel Cluster (IPC) during the bulb check. Does the warning indicator illuminate during the bulb check?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console. Did you complete the replacement?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2