LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Regal GS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory >> Installation Procedure

Installation Procedure

  1. Connect the ash tray harness electrical connector to the I/P harness.
    2. Fig 1: I/P Accessory Trim Plate
    GM326098Courtesy of GENERAL MOTORS CORP.
  2. Align the accessory trim plate to the I/P.
  3. Install the tabs into the I/P openings.
  4. Rotate the I/P accessory trim plate forward and press the clips into the retainers until fully seated.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the screws to the I/P accessory trim plate.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals