Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Position the instrument panel (I/P) upper trim panel to the I/P.
- Position the ambient light sensor to the I/P upper trim panel opening. Rotate the sensor clockwise to secure the sensor into place.
- If equipped, position the sun load sensor to the I/P upper trim panel opening. Rotate the sensor clockwise to secure the sensor into place.
- Align the I/P upper trim panel locating pins and retainers to the slots in the I/P.
- Carefully push down and forward on the I/P upper trim panel to secure the panel into place.
- Install the windshield pillar garnish moldings Refer to Garnish Molding Replacement - Windshield Pillar
in Interior Trim.