LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Regal GS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

    Fig 1: IPC Electrical Connector
    GM326091Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the cluster.
    2. Fig 2: IPC & Screws
    GM326089Courtesy of GENERAL MOTORS CORP.
  2. In order to install the IPC, perform the following procedures:
    1. Rotate the top of the cluster forward.
    2. Engage the locating pins on the bottom of the cluster.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to the IPC.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Install the IPC trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster .
scientia non olet · About LEMON Manuals