LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Regal GS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Compartment Replacement - Floor Console - Front >> Installation Procedure

Installation Procedure

    Fig 1: Installing Console Front Compartment
    GM689965Courtesy of GENERAL MOTORS CORP.
  1. Position the console front compartment to the floor console.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 2: Console Front Compartment Screws
    GM689967Courtesy of GENERAL MOTORS CORP.
  2. Install the console front compartment screws.

    Tighten:  Tighten the console front compartment screws to 2 N.m (18 lb in).

    3. Fig 3: Console Compartment Door Panel Screws
    GM689959Courtesy of GENERAL MOTORS CORP.
  3. Install the console front compartment door panel screws.

    Tighten:  Tighten the console compartment door panel screws to 2 N.m (18 lb in).

  4. Install the front floor console. Refer to Console Replacement - Front Floor .
scientia non olet · About LEMON Manuals