LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement (L67) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Drive Belt Routing (L67)
    GM190586Courtesy of GENERAL MOTORS CORP.
  1. Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
  2. Install the drive belt.
    3. Fig 2: Supercharger Drive Belt Routing
    GM190587Courtesy of GENERAL MOTORS CORP.
  3. Lift or rotate the supercharger drive belt tensioner using a 15 mm box end wrench on the pulley nut.
  4. Install the supercharger drive belt.
scientia non olet · About LEMON Manuals