Valve Lifter Installation

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Valve Lifters & Guides

Courtesy of GENERAL MOTORS CORP.

Dip the valve lifters in prelube GM P/N 12345501 (Canadian 992704) or the equivalent.
Install the valve lifters.
Install the valve lifter guides.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the valve lifter guide bolts.
Tighten: Tighten the valve lifter guide bolts to 30 N.m (22 lb ft).