LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Level Indicator
    GM42229Courtesy of GENERAL MOTORS CORP.
  1. Install the oil level indicator tube.
    • Lubricate the O-ring with engine oil and make sure it is in place.
    • Make sure the assembly is fully seated in the engine block.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the oil level indicator tube nut.

    Tighten:  Tighten the nut to 19 N.m (14 lb ft).

  3. Install the oil level indicator.
scientia non olet · About LEMON Manuals