LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Engine Block Plug Removal

Engine Block Plug Removal

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Threaded Gallery Plugs
    GM589370Courtesy of GENERAL MOTORS CORP.
  1. Remove the threaded coolant jacket plugs.
    2. Fig 2: Locating Engine Block Plugs
    GM26198Courtesy of GENERAL MOTORS CORP.
  2. Remove the remaining plugs using the following procedure.
    1. Obtain a suitable self-threading screw.
    2. Drill a hole into the plug.
    3. Install the self-threading screw.
    4. Use the screw to pry out the plug.
scientia non olet · About LEMON Manuals