Drive Belt Idler Pulley Installation (L67)

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Drive Belt Idler Pulley (L67)

Courtesy of GENERAL MOTORS CORP.

Install the drive belt idler pulley.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the drive belt idler pulley bolt.
Tighten: Tighten the drive belt idler pulley bolt to 50 N.m (37 lb ft).