LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Drive Belt Idler Pulley Bracket Installation (L67)

Drive Belt Idler Pulley Bracket Installation (L67)

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Drive Belt Idler Pulley Bracket
    GM36689Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt idler pulley bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the drive belt idler pulley bracket bolts.

    Tighten:  Tighten the drive belt idler pulley bracket bolts to 30 N.m (22 lb ft).

scientia non olet · About LEMON Manuals