LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Controls 3.8L (Introduction, Service & Replacement)) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EVAP purge pipe into the fuel bundle.
  2. Fig 1: Identifying Pipe Routing
    GM189079Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel hose/pipe bundle. Refer to Fuel Hose/Pipes Replacement - Filter to Engine .