LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Controls 3.8L (Introduction, Service & Replacement)) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis/Canister >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating EVAP And Fuel Tank Components
    GM699561Courtesy of GENERAL MOTORS CORP.
  1. Connect the EVAP purge pipe (8) to the EVAP canister. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
    2. Fig 2: View Of Fuel Filter & Pipes
    GM699549Courtesy of GENERAL MOTORS CORP.
  2. Connect the EVAP purge pipe at the fuel filter area. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals