LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Controls 3.8L (Introduction, Service & Replacement)) >> Repair Instructions >> Bypass Valve Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical - 3.8L.
  2. Remove the boost control solenoid. Refer to Boost Control Solenoid Replacement .
    3. Fig 1: View Of Bypass Valve Actuator
    GM21728Courtesy of GENERAL MOTORS CORP.
  3. Remove the vacuum hoses from the bypass actuator.
  4. Remove the bypass valve actuator mounting bolts and rotate the bypass valve actuator until the rod disengages the lever.
scientia non olet · About LEMON Manuals