Conditions for Setting the DTC
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- The HO2S 2 parameter is between 290-685 mV during the passive test.
- One of the following tests fail:
- Lean Intrusive Test
- The PCM detects that the HO2S 2 voltage is more than 290 mV for 11.4 seconds.
- The PCM detects that the HO2S 1 voltage is less than 100 mV.
- Rich Intrusive Test
- The PCM detects that the HO2S 2 voltage is less than 685 mV for 11.4 seconds.
- The PCM detects that the HO2S 1 voltage is more than 777 mV.
- Lean Intrusive Test