Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Install the blower motor.
- Install the blower motor bolts.
Tighten: Tighten the bolts to 1.3 N.m (12 lb in).
- Connect the blower motor electrical connector.
- Install the right side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.