Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Align the I/P cluster trim bezel assembly to the I/P trim pad.
- Install the I/P cluster trim bezel assembly screw.
Tighten: Tighten the screw to 2 N.m (18 lb in).
- Install the steering column opening filler panel. Refer to Steering Column Filler Replacement in Instrument Panel, Gages, and Console.
- Install the I/P compartment access hole cover.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.