Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: I/P Accessory Trim Plate (Center)

Courtesy of GENERAL MOTORS CORP.

Use a trim tool to remove the ignition switch bezel.
Pull the instrument panel (I/P) accessory trim plate rearward slightly.

Fig 2: Electrical Connector & Driver Information Display Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector from the driver information display assembly.

Fig 3: I/P Center Air Outlet

Courtesy of GENERAL MOTORS CORP.

Remove the I/P center air outlet screws.
Remove the I/P center air outlet.