Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new O-ring seal. Refer to O-Ring Replacement .
- Install the refrigerant pressure sensor to the liquid line.
Tighten: Tighten the sensor to 4.7 N.m (41 lb in).
- Connect the electrical connector to the A/C refrigerant pressure sensor.
- Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls-3.8L.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.