Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Press the right park brake cable into the bracket. Ensure that the locking tabs (1) are properly seated.
- Install the cable into the caliper bracket.
- Install the cable end button into the caliper lever.
- Clamp the wheel speed sensor harness onto lower control arm.
- Connect the right rear park brake cable (3) to the clip (2).
- Take up the cable slack at the equalizer.
- Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Lower the vehicle.
- Adjust the park brake system. Refer to Park Brake Adjustment .