Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Inlet Hose

Courtesy of GENERAL MOTORS CORP.

Partially drain the cooling system. Refer to Draining and Filling Cooling System .
Use J 38185 in order to reposition the hose clamp from the radiator. See Special Tools and Equipment .
Remove the radiator inlet hose from the radiator.

Fig 2: View Of Radiator Inlet Hose To Water Outlet Housing

Courtesy of GENERAL MOTORS CORP.

Use J 38185 in order to reposition the hose clamp from the water outlet housing. See Special Tools and Equipment .
Remove the radiator inlet hose from the water outlet housing and the vehicle.