LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Fuel Injector Sight Shield Replacement (L26) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil fill cap (2) and the oil fill tube (3).
  2. Insert the tab of the fuel injector sight shield under the fuel injector sight shield bracket.
  3. Place the hole of the fuel injector sight shield (1) onto the oil fill neck of the valve rocker arm cover.
    4. Fig 1: Oil Fill Cap, Oil Fill Tube & Fuel Injector Sight Shield (L26)
    GM911150Courtesy of GENERAL MOTORS CORP.
  4. Install the oil fill tube (3) and the oil fill cap (2).
scientia non olet · About LEMON Manuals