Engine Support Fixture

Tools Required

• J 28467-B Universal Engine Support Fixture
• J 36462-A  Engine Support Adapter Leg Set
• J-28467-501 Engine Support Fixture Adapters

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
2. Remove the left engine mount strut and the bracket from the upper radiator support. Refer to Engine Mount Strut Bracket Replacement - Upper Radiator Support .
Fig 1: Left Engine Mount Strut & Bracket
Courtesy of GENERAL MOTORS CORP.
3. Assemble the J-28467-501(2) to the J 28467-B cross bar (1).
4. Install the J 28467-B (1) and the J-28467-501 (2) to the fender rails.
Fig 2: J 28467-B & J-28467-501
Courtesy of GENERAL MOTORS CORP.
5. Install the J 36462-A  (1) to the cross bar (2).
6. Install the support lift hook (2) to the cross bar (1).
Fig 3: Support Lift Hook & Cross Bar
Courtesy of GENERAL MOTORS CORP.
7. Install the support hook (1) to the right engine lift hook (3).
8. Install the support hook (1) to the J 36462-A  (2).
9. Install the support hook (1) to the left engine lift hook (3).
Fig 4: Support Hook & Left Engine Lift Hook
Courtesy of GENERAL MOTORS CORP.
10. Raise the engine to release the pressure off of the engine mounts.
Fig 5: Raising Engine
Courtesy of GENERAL MOTORS CORP.