Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the engine coolant from the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
- Remove the engine coolant temperature sensor. Refer to Engine Coolant Temperature (ECT) Sensor Replacement in Engine Controls - 3.8L (L26 and L32).
- Remove the engine mount strut at the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left and Engine Mount Strut Replacement - Right .
- Remove the engine mount strut bracket bolts.
- Remove the engine mount strut bracket.