LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the engine splash shield. Refer to Splash Shield Replacement - Engine in Body Front End.
  4. Remove the motor mount to motor mount bracket nuts.
  5. Fig 1: Motor Mount & Bracket Nuts
    GM43405Courtesy of GENERAL MOTORS CORP.
  6. Remove the motor mount to frame nuts.
  7. Fig 2: Motor Mount & Frame Nuts
    GM1212272Courtesy of GENERAL MOTORS CORP.
  8. Using a suitable jackstand, raise the engine.
  9. Remove the motor mount from the vehicle.