LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement - Supercharger >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive belt tensioner.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the drive belt tensioner nut.

    Tighten:  Tighten the nut to 50 N.m (37 lb ft).

  4. Fig 1: Supercharger Drive Belt Tensioner & Nut
    GM97873Courtesy of GENERAL MOTORS CORP.
  5. Install the supercharger drive belt. Refer to Drive Belt Replacement (L26)  or Drive Belt Replacement (L32) .
  6. Fig 2: Supercharger Drive Belt
    GM190587Courtesy of GENERAL MOTORS CORP.