Rotating the Engine for Service Access
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
J 41131 Engine Tilt Strap
- Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.8L.
- Apply the parking brake.
- Put the transaxle in the Neutral position.
- Remove the engine mount struts. Refer to Engine Mount Strut Replacement - Right and Engine Mount Strut Replacement - Left .
- Install the J 41131 (2) to the engine mount strut bracket (1) and the upper radiator support (3).
- Rotate the engine forward for component access.