LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Frame And Underbody) >> Repair Instructions >> Frame Cushion or Insulator Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the front frame insulator opening.
  2. Apply a thin coat of rubber lubricant GM P/N 01051717 (Canadian P/N 12345884) or equivalent to the inside of the front frame insulator opening and front frame insulator.
  3. Align the front frame insulator to the front frame opening with the front frame alignment tabs facing to the front.
    4. Fig 1: View Of Front Frame Insulator/Front Frame
    GM777205Courtesy of GENERAL MOTORS CORP.
  4. Using theJ 45296  , or equivalent install the front frame insulator to the front frame. See Special Tools and Equipment .
  5. Install the frame front upper insulators.
  6. Install the frame. Refer to Frame Replacement .
    7. Fig 2: View Of Bolts From Front Frame Of Body
    GM1208433Courtesy of GENERAL MOTORS CORP.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals