LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Bumper System) >> Repair Instructions >> Impact Bar Replacement - Front Bumper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the front bumper impact bar to the vehicle.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts to the front bumper impact bar at the body.

    Tighten:  Tighten the front bumper impact bar to body bolts to 25 N.m (18 lb ft).

  4. Install the wiring harness to the rear of the front bumper impact bar.
  5. Install the horn bracket. Refer to Horn Replacement in Horns.
  6. Fig 1: View Of Front Bumper Impact Bar
    GM317363Courtesy of GENERAL MOTORS CORP.
  7. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper  .