LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Bumper System) >> Repair Instructions >> Fascia Support Replacement - Front Bumper Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front bumper fascia upper support to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the front bumper fascia upper support bolts.

    Tighten:  Tighten the bolts to 7 N.m (61 lb in).

  3. Install the front bumper fascia upper support screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    4. Fig 1: View Of Front Bumper Fascia Upper Support
    GM1229878Courtesy of GENERAL MOTORS CORP.
  4. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper  .
scientia non olet · About LEMON Manuals