LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear bumper energy absorber to the fascia.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to the rear bumper energy absorber.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Fig 1: View Of Rear Bumper Energy Absorber
    GM1229988Courtesy of GENERAL MOTORS CORP.
  5. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper  .