Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Position the air inlet grille (3) to the vehicle.
- Install the push-in retainers (2) to the sides of the air inlet grille.
- Install the push-in retainers (1) to the air inlet grille.
- Install the windshield washer hose to the air inlet grille.
- Install the wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
- Install the hood rear seal. Refer to Seal Replacement - Hood Rear .
- Close the hood.