LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Seat Belt System) >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Verify that the release lever at the top of the bracket is in the full up position.
    Fig 1: Front Shoulder Belt Guide Adjuster
    GM157286Courtesy of GENERAL MOTORS CORP.
  1. Position shoulder belt guide adjuster bracket to the upper center pillar.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the shoulder belt guide belt adjuster bracket bolts.

    Tighten:  Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).

  4. Install the upper quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.