Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the auxiliary power outlet fuse from the underhood fuse block.
- Remove the receptacle:
- Look into the receptacle. There are two 3 mm (0.11 in) tab windows 12 mm (0.47 in) from the front of the receptacle. The J 42059 pushes the plastic latches from these tab windows and the receptacle can be pulled straight out. See Special Tools and Equipment .
- Place one side of the "T" portion of the J 42059
into a tab window (2). See Special Tools and Equipment .
The J 42059 will not fit straight into the receptacle. See Special Tools and Equipment . Angle the J 42059 slightly for insertion into the receptacle. See Special Tools and Equipment .
- Insert the other side of the "T" into the opposite tab window (1).
You must move the J 42059 handle toward horizontal to engage the other tab window. See Special Tools and Equipment .
- Use the J 42059 to pull the receptacle straight out. See Special Tools and Equipment .
- Remove the J 42059 . See Special Tools and Equipment .
- Disconnect the electrical connector. Make sure the connector remains routed through the opening.
- Remove the receptacle.
- Remove the retainer.