Conditions for Clearing the DTC
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- A current DTC will clear when the fault is no longer present and the ignition switch is cycled.
- A history DTC will clear after 100 consecutive ignition cycles without a fault present.
- A scan tool may be used to clear history and current DTC(s).
DTC B3106
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Keyless Entry Schematics | |||
| 1 | Did you perform the Keyless Entry Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Remote Keyless Entry |
| 2 | Does the scan tool display DTC B1003, B3102 or B3103? | Go to Diagnostic Trouble Code (DTC) List | Go to Step 3 |
| 3 |
IMPORTANT:
Perform the keyless entry transmitter programming procedure when replacing the remote control door lock receiver (RCDLR). Replace the RCDLR. Refer to Remote Control Door Lock Receiver Replacement .Did you complete the replacement? |
System OK | - |