LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Column Tilt Head Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pivot Pins & J 21854-01
    GM295948Courtesy of GENERAL MOTORS CORP.
    CAUTION: SIR Caution
  1. Disable the SIR module. Refer to SIR Disabling and Enabling Zone 3 in SIR.

    Remove the turn signal switch housing. Refer to Turn Signal Switch Housing Replacement .

  2. Remove the tilt spring. Refer to Tilt Spring Replacement .
  3. Remove the pivot pins (1) using J 21854-01  . See Special Tools and Equipment .
    4. Fig 2: Steering Wheel Lock Shoes
    GM338062Courtesy of GENERAL MOTORS CORP.
  4. Pull the tilt arm in order to disengage the steering wheel lock shoes from the dowel pins (2) in the steering column support assembly.
    5. Fig 3: View Of Steering Column Housing And Bearing Assembly
    GM338016Courtesy of GENERAL MOTORS CORP.
  5. Remove the steering column tilt head assembly (1).
scientia non olet · About LEMON Manuals