Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Install a new EGR valve gasket (3).

Fig 1: View Of EGR Valve

Courtesy of GENERAL MOTORS CORP.

Install the EGR valve (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the EGR valve nuts (1).
Tighten: Tighten the nuts to 25 N.m (18 lb ft).
Connect the EGR valve electrical connector.