Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Install the EGR valve outlet pipe (1).

Fig 1: EGR Valve Outlet Pipe

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the EGR outlet pipe bolt (2) to the intake manifold.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
Install the EGR outlet pipe nut (3) to the EGR valve inlet adapter pipe.
Tighten: Tighten the nut to 25 N.m (18 lb ft).
Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .