LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Engine Controls (Introduction) - 3.8L) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis/Canister >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the EVAP purge pipe (8) to the EVAP canister. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  2. Fig 1: Locating EVAP And Fuel Tank Components
    GM699561Courtesy of GENERAL MOTORS CORP.
  3. Connect the EVAP purge pipe at the fuel filter area. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Fig 2: View Of Fuel Filter & Pipes
    GM699549Courtesy of GENERAL MOTORS CORP.
  5. Lower the vehicle.