Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Position the fold down seat backs on the seat back frame.

Fig 1: Rear (Folding) Seat Back Frame

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice Cautions and Notices

Install the rear seat fold down pivot bolts (1) on the seat back frame.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).

Fig 2: Seat Back Frame Pivot Bolts

Courtesy of GENERAL MOTORS CORP.

Install the rear seat back bolsters. Refer to Seat Back Bolster Replacement - Rear Split Folding .
Install the rear seat back. Refer to Seat Back Replacement - Rear (Folding) .