LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Seat System) >> Repair Instructions >> Seat Back Cover Replacement - Front (Fold Flat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat trim cover on the seat back.
  2. Install the head restraint retainers but not the head restraint. Refer to Head Restraint Retainer Replacement - Front Seat .
  3. Pull the trim cover down over the pad.
  4. Install the J-hooks on the back side of the trim cover.
    5. Fig 1: J-Hooks & Back Side Of Trim Cover (Front Seat)
    GM870732Courtesy of GENERAL MOTORS CORP.
  5. Install the hook and loop connectors on the lower back side of the trim cover.
    6. Fig 2: Hook & Loop Connectors On Lower Back Side Of Trim Cover (Front Seat)
    GM870734Courtesy of GENERAL MOTORS CORP.
  6. Install the hog rings.
    7. Fig 3: Hog Rings & Trim Cover (Front Seat)
    GM870737Courtesy of GENERAL MOTORS CORP.
  7. Install the seat back panel. Refer to Seat Back Panel Replacement - Front .
  8. Install the head restraint. Refer to Head Restraint Replacement - Front Seat .
scientia non olet · About LEMON Manuals