Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Position the seat to the full-up position.
- Remove the bolts that secure the front seat frame to the floor. Refer to Seat Replacement - Front Bucket .
- Rotate the seat rearward to access the heater relay (2).
- Use J 38778 to disengage the push-in retainer (1) from the seat pan.
- Disconnect the electrical harness connector (3) from the relay (2).
- Remove the relay from the front seat.