LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the trim panel to the upper I/P.
    2. Fig 1: View Of I/P Upper Trim Panel
    GM910545Courtesy of GENERAL MOTORS CORP.
  2. Position the Theft LED to the opening in the trim panel.
    3. Fig 2: View Of LED & Trim Panel
    GM929254Courtesy of GENERAL MOTORS CORP.
  3. Rotate the LED.
    4. Fig 3: View Of Theft LED
    GM928779Courtesy of GENERAL MOTORS CORP.
  4. Position the DRL sensor into the opening in the trim panel.
    5. Fig 4: DRL Ambient Light Sensor
    GM929317Courtesy of GENERAL MOTORS CORP.
  5. Rotate the sensor. Make sure that the wiring harnesses will not be pinched when the trim panel is installed.
  6. Align the I/P upper trim panel to the I/P trim pad. Press the retainers into the openings.
  7. Install the garnish moldings to the right and the left windshield pillars. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
scientia non olet · About LEMON Manuals