Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the key into the lock cylinder.
- Align the lock cylinder in the same position used for removal. Push the cylinder in place to seat fully.
- Turn the key counterclockwise to secure the lock cylinder retainer.
- Remove the key from the lock cylinder.
- Inspect the operation of the lock cylinder. The lock cylinder should only allow a 1/4 turn and should be securely retained in the door handle.
- Install the I/P compartment latch. Refer to Latch Replacement - Instrument Panel (I/P) Compartment .