LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the I/P cluster trim bezel assembly to the I/P.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: I/P Cluster Trim Bezel Assembly
    GM929212Courtesy of GENERAL MOTORS CORP.
  3. Install the I/P cluster trim bezel assembly screw.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

  4. Fig 2: I/P Cluster Trim Bezel Assembly Screw
    GM928876Courtesy of GENERAL MOTORS CORP.
  5. Install the I/P steering column opening filler assembly. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  6. Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .
  7. Install the I/P compartment access hole cover to the I/P.
  8. Fig 3: View Of Left Instrument Panel Outer Trim Cover
    GM929251Courtesy of GENERAL MOTORS CORP.