Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Paint Damage Notice in Cautions and Notices.

Apply masking tape to the fender and door edges.

IMPORTANT: Do not remove the door from the vehicle to replace the upper or lower hinges.

Open and support the door.
Clean the area around the hinge and mark the location with a grease pencil.
If the upper hinge is broken do the following:
Remove the upper hinge bolts from the door side in the specified sequence (1, 4).

Fig 1: Side Hinge Bolts (Front Door)

Courtesy of GENERAL MOTORS CORP.

Remove the upper hinge bolts from the hinge pillar side in the specified sequence (1, 4, 5).

Fig 2: Upper Hinge Bolts At Hinge Pillar Side (Front Door)

Courtesy of GENERAL MOTORS CORP.

If the lower hinge is broken do the following:
Remove the lower hinge bolts from the door side in the specified sequence (3, 2).

Fig 3: Door Side Hinge Bolts (Front Door)

Courtesy of GENERAL MOTORS CORP.

Remove the lower hinge bolts from the hinge pillar side in the specified sequence (3, 2).
Remove the broken hinge from the door.

Fig 4: Upper Hinge Bolts At Hinge Pillar Side (Front Door)

Courtesy of GENERAL MOTORS CORP.